Datecs EP-2000 Bedienungsanleitung PDF herunterladen (Seite 54)

1 DATECS

OD 07.01.02/v.1

стр. 54 от 65

EP_2000_PM_EN_V.1.60_Nov.2009.doc

Feeds receipt paper to cutting position and feeds paper

steps

(n x 0.125 mm)

, then cuts receipt.

104

Feeds receipt paper to cutting position and feeds paper

steps

(n x 0.125 mm)

, then cuts receipt and feeds receipt paper

back to the printing position.

This option is to reduce top margin of the next receipt after cutting.

90. (GS W) Setting the print area width

Code

[1Dh] + [57h] + n1 + n2

Description This command sets the print area width in dots (1/203 inches). This

command only works when it is entered at the beginning of a line.

The defined value of print area width is

n1+256*n2

dots.

The default value depends on the mode 58 mm / 78 mm paper roll and

408 or 576 dots.

The command is valid in standard mode only.

91. (GS X) Drawing a rectangular box with selected thickness in page mode

Code

[1Dh] + [58h] + xL + xH + yL + yH + dxL + dxH + dyL + dyH + n + d

and

Low and high byte of the horizontal position of

the top left corner of the box in the active page.

and

Low and high byte of the vertical position of the

top left corner of the box in the active page.

dxL

and

dxH

Low and high byte of the width of the box.

dyL

and

dyH

Low and high byte of the height of the box.

Filling mode:

‘0’

Area under the box is cleared

(white).

‘1’

Area under the box is filled (black).

‘ 2’

Area under the box is inverted.

Box thickness (from

to 64).

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 64 65

Kommentare zu diesen Handbüchern

Keine Kommentare

Datecs EP-2000 Bedienungsanleitung Seite 54

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Datecs EP-2000