Datecs EP-2000 Bedienungsanleitung PDF herunterladen (Seite 27)

1 DATECS

OD 07.01.02/v.1

стр. 27 от 65

EP_2000_PM_EN_V.1.60_Nov.2009.doc

32. (ESC 2) Specifying 1/6-inch line feed rate

Code

[1B] + [32h]

Description If in the line there are symbols that will not fit in the defined size, the line

automatically is set to be of the necessary height so they fit.

33. (ESC 3) Specifying line feed rate n/203 inches

Code

[1Bh] + [33h] + n

Description

from 0 to 255

Default value is

=22h (1/6 inches).

34. (ESC <) Changes print direction tо opposite

Code

[1Bh] + [3Ch]

Description The command changes current print direction. It is needed when using

Hebrew and Arabic code tables, but is working for all code tables.

Default print direction is from right to left for code tables 19, 21, 22, 23,

24 and from left to right for all others.

The command is supported in firmware

version 1.51

or higher.

35. (ESC =) Data input control

Code

[1Bh] + [3Dh] + n

Description The command is used for selecting a peripheral device, which will

receiving incoming data.

can be from

255

, but only the LSB is of significance.

Value 1

‘1’

: A printer is selected only.

Value 0, '0', 2

‘2’:

A customer display is selected only.

Value 3

‘3’:

A printer and a customer display are selected.

When a customer display is selected only (

n=2

), all data, except

this command and the real-time commands, are ignored..

When turning

the printer, selected peripheral device is specified by

memory switch

, as well if executing a command

(ESC @)

and

was

‘3’

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 64 65

Kommentare zu diesen Handbüchern

Keine Kommentare

Datecs EP-2000 Bedienungsanleitung Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Datecs EP-2000