DATECS DPP-450 Programmer’s Manual
Code: [1Ch] + [53h] + n1 +n2
The command sets the leftward and rightward space amount for two-byte character mode.
n1 specifies leftward space, n2 rightward space. The space amount is set in dot unit (1/203
inch unit). The initial values are n1=0 and n2=0. When the font size is doubled the space
between characters is also doubled. Possible values are from 0 to 63 dots.
112. Selecting double size characters for two-byte text mode (FS W)
Code: [1Ch] + [57h] + n
The following values of n are possible:
0 or 30h Canceling double size characters.
1 or 31h Specifying double size characters.
Double size characters may be selected using command FS !.
113. ESC y WAN. Format:
[1Bh] + [79h] + [4Ch] + [41h] + [4Eh] + [3Ah] + Data
Data Format: T1 + D1 + T2 + D2 + … + [00h]
Ti is one byte, which select which field will be set, and can be following values:
01h IP Address: 8 ASCII hex symbols.
02h Subnet Mask: 8 ASCII hex symbols.
03h Default Gateway: 8 ASCII hex symbols.
04h DHCP Enable: 1 symbol 'D' (Enable) or 'F' (Disable).
05h Port: 4 ASCII hex symbols.
06h Network Mode IBSS: 1 byte '0' (BSS) or '1' (IBSS).
07h IBSS Channel: 1 ASCII hex symbol from '1' till 'D'.
Region Domain (If Network Mode IBBS is '0'):
0 - DOMAIN_AMERICA Available Channels: 1 - 11
1 - DOMAIN_EUROPA Available Channels: 1 - 13
2 - DOMAIN_JAPAN_A Available Channels: 14
3 - DOMAIN_JAPAN_B Available Channels: 1-13
08h SSID: up to 32 symbols.
09h Power Management Enable: 1 byte '0' (Disable) (fast data
transmition) or '1' (Enable) (slow data transmition).
0Ah Reserved.
0Bh Reserved.
0Ch Password: up to 63 symbols.
Not all fields must be setted. If any field missing, it keep its old value.
Kommentare zu diesen Handbüchern