Datecs LP-50 Bedienungsanleitung

1 DATECSUser’s ManualLINE THERMAL PRINTERMODEL EP-50

1 DATECS EP-5018 19User’s Manual3. OUTER APPEARANCE AND COMPONENT PARTS(1) POWER switchTurns on/off the power for the printer body.(2) POWER lampLight

1 DATECS EP-5020 21User’s Manual4. OPERATION4.1 Connecting AC Adapter!CAUTIONy Use only the specified AC adapter.y When disconnecting/reconnecting the

1 DATECS EP-5022 23User’s Manual!CAUTION!CAUTIONy The printer cover is not stationary (Opening/Closing). After detaching it,be careful not to lose or

1 DATECS EP-5024 25User’s Manual4.5 LEDsPOWER Lights green when the printer is switched on.ERROR Flashes red when the printing head is overheated.PAP

1 DATECS EP-5026 27User’s Manual! If the code table is selected using the DIP switches, ESC t command isdisabled and the code table cannot be changed

1 DATECS EP-5028 29User’s Manual7. POWER CONNECTORThis connector is to supply the power from the special AC adapter (DATECS PS).Connector SchematicJac

1 DATECS EP-5030 31User’s Manual9. DETAILED DESCRIPTIONXXXX ALL[Function] Command Function[Code] A sequence of code constituting a command is represen

1 DATECS EP-5032 33User’s Manual[Sample Program]LPRINT “0123456789012345678901”;LPRINT CHR$ (&HA);LPRINT CHR$ (&H9) + “AAA”;LPRINT CHR$ (&

1 DATECS EP-5034 35User’s Manual7. ESC # nSetting the Euro symbol position[Code] [1Bh] + [23h] + n[Range] {0 <= n <= FFh}[Outline] This command

1 DATECS EP-5036 37User’s ManualIf switch 5 is ON:[Code] [1Bh] + [26h] + a + n1 + n2 + D11 + … + D(m-n+1)k[Range] { m = 0-3 Subcommand}{20h <= n1

CONTENTS1 OUTLINE ... 1 31.1 Features ...

1 DATECS EP-5038 39User’s Manual12. ESC * m n1 n2 [ d ] kSpecifying the Bit Image Mode[Code] [1Bh] + [2Ah] + m + n1 + n2 + D1+ … + Dk[Range] {m= 0, 1,

1 DATECS EP-5040 41User’s Manual0 Canceling an underline.1 Specifying an underline for 1-dot width.2 Specifying an underline for 2-dots width.[Caution

1 DATECS EP-5042 43User’s Manual17. ESC 3 nSetting line feed rate of minimum pitch[Code] [1Bh] + [33h] + n[Range] {0 <= n <= FFh}[Outline] The

1 DATECS EP-5044 45User’s Manual20. ESC = nData Input Control[Code] [1Bh] + [3D] + n[Range] {0 <= n <= FFh}[Outline] Selecting equipment in whic

1 DATECS EP-5046 47User’s Manual24. ESC E nSpecifying/canceling highlighting[Code] [1Bh] + [45h] + n[Range] {0 <= n <= FFh}[Outline] Specifying/

1 DATECS EP-5048 49User’s Manual26. ESC I nSpecifying/cancelling italic printing (ESC I n)[Code] [1Bh] + [49h] + n[Range] {0 <= n <= FFh}[Outlin

1 DATECS EP-5050 51User’s Manual30. ESC V nSpecifying/Canceling 90º -right- turned Characters[Code] [1Bh] + [56h] + n[Range] {0 <= n <= 1}.[Outl

1 DATECS EP-5052 53User’s ManualBit Meaning28.0 Supports IrDA mode28.1 Supports magnetic card reader28.2 Supports simultaneous reading of three tracks

1 DATECS EP-5054 55User’s Manual35. ESC _Restore factory defaults and save them to nonvolatile RAM[Code] [1Bh] + [5Fh][Outline] Select font A, no bold

1 DATECS EP-5056 57User’s Manual[Caution] When the panel switch is disabled with this command, the LF switchis disabled. Therefore, the paper cannot b

1 DATECS EP-504 5User’s ManualIMPORTANT SAFETY INSTRUCTIONSy Read all of these instructions and save them for future reference.y Follow all warnings a

1 DATECS EP-5058 59User’s Manual43. ESC tSelecting the character code table[Code] [1Bh] + [74h] + n[Range] { 0 <= n <= 19 }[Outline] Selects the

1 DATECS EP-5060 61User’s ManualIn the Chinese version of the printer one of the following supported code tables isselected according to the value of

1 DATECS EP-5062 63User’s Manual[Print Results][Caution] The command changes only the print direction of the characters - allgraphics and bar codes ar

1 DATECS EP-5064 65User’s Manual50. (1) GS V m (2) GS V m nCutting the paper[Code] (1) [1Dh] + [56h] + m(2) [1Dh] + [56h] + m + n[Range] (1) {m

1 DATECS EP-5066 67User’s Manual• If the character code d cannot be printed in the respective barcodesystem, the barcode so far will be printed, proce

1 DATECS EP-5068 69User’s Manual54. GS H nSelecting of Printing Position of HRI Code[Code] [1Dh] + [48h] + n[Range] {0 <= n <= 3}[Outline] Selec

1 DATECS EP-5070 71User’s Manual56. GS p n1 n2 n3Setting barcode PDF-417 parameters[Code] [1Dh] + [70h] + n1 + n2 + n3[Range] {0 <= n1 <= 255}{0

1 DATECS EP-5072 73User’s Manual58. GS *Defining the Download Bit ImageThere are two variants of this command depending of the position of switch 5.If

1 DATECS EP-5074 75User’s Manual59. GS / mPrinting the downloaded bit image[Code] [1Dh] + [2Fh] + m[Range] {0 <= m <= 3}m Mode Name Dots in Ver

1 DATECS EP-5076 77User’s Manualm Mode Name Dots in Vertical Dots in HorizontalDirection Direction0, 48 Normal mode 203 DPI 203 DPI1, 49 Double wide m

1 DATECS EP-506 7User’s ManualSAFETY PRECAUTIONS – BE SURE TO OBSERVEIn order to prevent hazards to an operator or other persons anddamage to property

1 DATECS EP-5078The printer will become busy before each writing cycle in the NVmemory. Any data sent while the printer is busy may not beprocessed an

1 DATECS EP-508 9User’s Manual PRECAUTIONS FOR INSTALLATIONy Do not use or store the equipment in a place exposed to fire, moisture, or directsunshi

1 DATECS EP-5010 11User’s ManualPRECAUTIONS FOR HANDLINGDo not handle the equipment in the following manners, because problemsmay result.y Do not use

1 DATECS EP-5012 13User’s ManualDAILY MAINTENANCEy At the time of maintenance, be sure to turn off the power switch of the printerand unplug it from

1 DATECS EP-5014 15User’s Manual2. BASIC SPECIFICATIONS2.1 Basic specifications1.2 UnpackingWhen unpacking the package, confirm that the following par

1 DATECS EP-5016 17User’s Manual2.2 Paper Specifications2.2.1 Recommended Papery Thermal paper rolly Type: Thermal papery Paper width: 58 + 0/–1 mmy P